2018 Volkswagen e-Golf Brake Pads in Avondale, AZ

A grinding sound means the friction material is gone and the backing plate is contacting the rotor. These symptoms should not be ignored because continued driving can cause additional brake damage. An inspection measures pad material at all four corners.

• Squeal or scrape during braking
• Grinding when the brake pedal is applied
• Longer pedal travel or slower stopping

The inspection includes the rotors, calipers, hardware, and brake fluid condition. Brakes wear as a system, so replacing pads while ignoring a damaged rotor or related component can shorten the life of the new parts. The findings determine what service is appropriate.

• Measurement of remaining pad material at all four corners
• Replacement with pads matched to the braking system
• Inspection of rotors, calipers, hardware, and brake fluid

City traffic, towing, hills, and hard stops can shorten pad life. Driving conditions and braking habits vary, so a published mileage figure does not determine the condition of the pads on a specific vehicle. An inspection measures remaining material on all four corners.

• City traffic can increase braking frequency
• Hills and hard stops can accelerate wear
• Four-corner measurement shows current condition

The rotors are inspected alongside the pads, calipers, hardware, and brake fluid. If worn pads have reached the backing plate, rotor damage may be present and must be assessed. Replacing one brake component while ignoring another can reduce the service life of the new part.

• Rotors are checked during pad service
• Grinding can indicate rotor contact with the backing plate
• System condition determines the needed repair

A grinding noise means the friction material is gone and the backing plate is on the rotor; stop driving and book brake service. Squealing, scraping, longer pedal travel, or increased stopping distance also requires prompt inspection. Brake pads, rotors, hardware, calipers, and fluid should be assessed together.

• Stop driving if the brakes grind
• Book an inspection for longer stopping distance
• Have all four corners measured

The dealership is located at 10205 West Papago Freeway, Avondale, AZ 85323, in the Avondale Auto Mall just off I-10. Booking gives you a measurement of the remaining pad material on all four corners and an inspection of related brake components. This helps determine whether service is needed now or at a later visit.

• Schedule online through the service appointment page
• Call 623-400-7146 for assistance
• Visit the Avondale Auto Mall location